Download

Last stable version: 3.91

To test GMFC, download the xx.zip file, unzip it and run install_gmfc_xx_en.exe . You may run GMFC through the start
menu. At startup time, GMFC will display in the about screen, the software code that uniquely identifies your copy of GMFC.

The parallel port driver is fully integrated with Windows XP and later versions (32bits versions of Windows only). It allows to choose the parallel port. Open the device manager, there is now a Hotwire device. Open the property page of the MM2001 driver and then, the configuration page. Select the parallel port to which the MM2001 interface is connected. You need then to reboot. After reboot, when clicking on the MM2001 configuration page, the “Time between interrupts” field shows the time in microseconds between two interrupts. That permits to see if the driver works, without launching GMFC.


GMFC Expert


GMFC PRO


GMFC LIGHT


GMFC PE

      • Version 4.0.2, 1/2/2010. Test version. New offset foam cutting option. Max cutting speed equals to maximum material speed. Independent cutting speed for round spars and entry into the bloc. Wire cleaning parameters saved. Time for heat stabilization parameter in table configuration.
      • Version 3.91, 10/09/2017
        Stable version. New dialog for calibrating foam speed and kerf. Independent value of the TE margin, from the TE prolongation.
      • Version 3.90, 10/09/2017
        Stable version.
      • Version 3.89, 28/09/2013
        New version of the installer for Windows 7 and Vista.
      • Version 3.88, 08/04/2011
        Micro-second based computations.

GMFC may crash in the spar dialog when running on older versions of win95. This is due to a bug solved in the year2000 update. To solve this problem:


Utilities